MTHTrains 4-6-0 Steam Freight/Passenger Set Instructions d'exploitation télécharger pdf (Page 21)

Additional F Functions

Idle Sequence - F14-F16. Pressing F14, F15, or F16 twice (toggling on then off)

will trigger an Idle Sequence if the engine is not moving. These vary from engine

to engine and may include things like checking the coal load, checking the water

level, using the Alemite grease gun on the drivers, etc. When triggered, these will

run through the sequence that varies in duration.

NOTE – The engine must be sitting still in order to trigger these

Extended Start-Up – F17. If your engine is shut down or you've just applied DCC

power pressing F17 twice (toggling it on then off) will start the Extended Start-Up

sounds. This is very similar to F3 except you will hear the crew talking back and

forth about getting the engine ready to run.

Extended Shut-Down – F18. If your engine is already up and running you can play

the Extended Shut Down sounds by pressing F18 twice (toggling on then off). The

Extended Shut Down is very similar to F3 in that the engine will ultimately shut

down, but in the case of Extended Shut Down you will hear the crew talking back

and forth about how the engine ran, time schedules, etc.

Labor Chuff – F19. To force the Labor Chuff sound in a steam engine, press the

F19 button once (enable F19). As long as F19 is enabled the engine will play its

Labor Chuff sounds. To set the sound back to Normal Chuff press the F19 button

again (disable F19).

Drift Chuff – F20. To force the Drift Chuff sound in a steam engine, press the

F20 button once (enable F20). As long as F20 is enabled the engine will play its

Drift Chuff sounds. To set the sound back to Normal Chuff press the F20 button

again (disable F20).

One Shot Doppler – F21. You can set your MTH PS3.0-equipped engine to

simulate the actual Doppler Effect sound a real engine makes as it passes you. To

do this, press the F21 button once (enable F21) and then listen as the engine makes

that pitch shift that mimics the Doppler Effect perfectly. Press the F21 button

again (disable F21) to shut off the Doppler Effect. With a little practice in timing

and speed you can make this happen right in front of you.

Coupler Slack – F22. When an engine hooks up and pulls a train it has to take up

the coupler slack. You can play this sound by pressing F22 twice (toggling on then

off). This feature works two ways – While the engine is sitting still, press F22 twice

to enable it. Then, when you move the engine, it will play the Coupler Slack sound.

The second way is to simply force the sound while the engine is moving. To do

this, simply press F22 twice (toggling it on then off). The sound will play.

Coupler Close – F23. To play the Coupler Close sound press the F23 button twice

(toggling it on then off). You can play this sound as you're coupling cars together

to add realism.

RailKing 4-6-0 Steam Freight/Passenger Set with Proto-Sound® 3.0

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 57 58

Pas de commentaire

MTHTrains 4-6-0 Steam Freight/Passenger Set Instructions d'exploitation Page 21