MTHTrains 4-6-0 Steam Freight/Passenger Set Instructions d'exploitation télécharger pdf (Page 19)

PFA

F4 – PFA. PFA in MTH lingo stands for Passenger/Freight Announcements. Your

engine is pre-programmed for the appropriate type of sounds based upon the type

of service the real-life engine used in daily operation.

There are five sound sequences or segments in the PFA feature. Each segment is

advanced by you, the operator. You hit the Direction button on the DCC controller

to let the engine know you want it to advance. In most PFA sequences there is a

minimum wait time of about 10 seconds before it will advance. So, here is how a

typical PFA sequence operates:

1. Press the F4 button twice (toggle F4 on then off) to start the PFA

sequence on the engine. You'll hear “Now arriving…”

2. Press the F4 button twice (toggle F4 on then off) again to stop the engine

at the station. It is recommended to do it this way rather than bring the engine to a

stop with the throttle since PFA allows automatic departure (movement) of the

engine after the last F4 toggle. You'll hear the engine sounds switch from the cab to

the station with all the ambient station sounds you'd hear in the real thing

3. Press the F4 button twice (toggle F4 on then off) again to advance the

sequence. You'll hear “Now boarding…”

4. Press the F4 button twice (toggle F4 on then off) again to advance the

sequence. You'll hear “Now departing…”

5. Press the F4 button twice (toggle F4 on then off) the last time to advance

the sequence. You'll hear “All aboard…” the engine sounds will switch over to the

cab again and the engine will pull away at the same speed it entered the station. For

a few seconds the bell will ring as it's departing the station

Note – In order to maximize the realism, we recommend that you reduce the

engine's speed to a slow pace just prior to hitting the F4 button the first time (to

activate PFA)

Lights

F0 – Headlight/Taillight. This toggles your headlight/taillight on and off.

F5 – Lights.

Master Volume

F6 – Master Volume. There are 10 volume levels. Pressing F6 twice (toggling on

then off) raises the Master Volume one level. The Master Volume loops. That is, if

you go past the 10th level it will loop back around to the 1st or lowest volume level.

RailKing 4-6-0 Steam Freight/Passenger Set with Proto-Sound® 3.0

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 57 58

Pas de commentaire

MTHTrains 4-6-0 Steam Freight/Passenger Set Instructions d'exploitation Page 19